Fiber FocusTM 1500KW Laser Welding Machine consists of a laser source, energy feedback laser power system, control panel, beam split and fiber transfer system, industry TV observation system, cooling system, etc.
Fiber Focus 1500KW Laser Welding Machine adopts a solid material laser source. It uses pulse fiber laser, focus cavity, optical resonance cavity, cooling filter, and laser power.
Focus cavity is used to focus the lamp pump beam to working materials to get a higher pump efficiency. The Fiber Focus 1500 Laser Welding Machine’s focus cavity uses a gilded reflector, with diffuse reflection tight coupling structure. Cavity surface is coated by a glaze, with anti-corrosion and anti-aging ability for the lifetime of the machine.
Optical resonance cavity is the main part of the laser source. It consists of total reflective mirrors and partial reflective mirrors which are mainly for 1.064µm beam. Light created by working materials, after magnified and vibrated between two mirrors, output by partial reflective mirror.
The cooling and filter system is a necessary auxiliary part of the laser source. With a solid laser source, only small parts of input light energy could be changed to laser energy. Others will be lost in the heat. Our cooling and filter system will take away the heat, keep internal components at working temperature, and protect working materials from ultraviolet radiation.
The control panel is stainless steel plate.
Power: Adjustable percentage
Frequency: 50~3000Hz
Duty cycle: adjustable percentage
Mode: 6 kinds of spot modes are optional
Frequency: 2~46HZ (1Hz = 10 turns/S)
Width: 0.2~5mm adjustable light spot
Advance Amount: gas blowing time in advance (recommended value 150ms)
Delay amount: delayed gas blowing time (recommended value 200ms)
Proportional valve: percentage control is effective when the proportional valve is installed.
Laser head status refers to the motor status, the indicator light will go out when the motor is abnormal
Conduction state: refers to the safety signal fed back after the gun tip touches the metal plate with the alligator clip.
Torch status: the torch status light is on when the gun headlight button is pressed.
Gas: When the manual test light is on, the blowing signal is effective (turn off the gas button during automatic welding)
Shutter: control of the laser light signal (the shutter button will automatically close after 15 minutes of inactivity)
It is suitable for all types of laser generators at home and abroad, with a code switch that can be switched to a 5V laser control signal.
A variety of protection measures are added to the control signal part to solve the potential safety hazards to customers caused by control failures by mis-operation, wiring errors or current interferences at the customer site.
The drive communicates with the laser control card, and the signal is fed back to the liquid crystal display of the gun head.
15V input: Servo motor power supply port
X: Connect to X axis motor communication line
Y: Connect to Y-axis motor communication line
Control box shell: alloy aluminum, shielding and anti-interference
Patent design, double cycle cooling, precise thermal control. Adopts titanium alloy coil structure, evaporator, and pump. All use high strength non-metallic materials or stainless steel to ensure air cooling quality. Cooling compressor makes the 2nd cooling cycle.
Wire feeder fixture, wire feeding copper nozzle and welding copper nozzle. The internal structure of the wire feeder adopts a high-precision fully enclosed low-speed motor, and the dual-drive wire feeding structure makes the wire feeding smoother and stronger without wire jamming. Wire feeding regulator, LED screen displays real-time wire feeding speed, high-precision speed control button, and good wire feeding speed controllability.
©2023 Fiber Laser Welder. All Rights Reserved. | PRIVACY POLICY